Bio-Inspired Marine Anti-Biofouling Coating
YNT-AT-603
Anti-Biofouling & Antibacterial: Micro/nano bio-inspired surface reduces adhesion of barnacles, oysters, and other marine organisms; inherent antibacterial properties inhibit bacterial and microbial growth.
High Weather Resistance: Forms a dense protective film after curing, effectively blocking moisture ingress and protecting substrates from liquid corrosion.
Biodegradable Surface: Smooth, low-adhesion surface minimizes fouling; the outermost layer gradually degrades during operation, maintaining long-term anti-adhesion performance.
Where to Use: Vessels, offshore platforms, marine aquaculture facilities, bridges, and other above- and underwater equipment.
How to Apply: Brush or spray application.
|
Quality Indicators |
Basic Data |
||
|
Contact Angle / Sliding Angle (Water) GB/T 30447-2013 |
148.2° ±1° / 13.6° ±1° |
Color |
Milky white |
|
Anti-Fouling Performance 60 d GB/T 7789-2007 |
Adhesion < 5% |
Solid Content GB/T 2793-1995 |
50.20% |
|
Long-Term Shallow Sea Immersion |
92 |
Coating Coverage |
21 m²/L |
|
Neutral Salt Spray Corrosion Test GB/T 10125-1997 |
3200 h, coating intact |
Drying Time |
Surface dry: 6 h Fully dry: 24 h |
|
Acidic Salt Spray Corrosion Test GB/T 10125-1997 |
1800 h, coating intact |
||
|
Artificial Weathering Resistance GB/T 1865-2009 |
2400 h, coating intact |
||
|
6M NaOH Immersion GB/T 9274-1988 |
1400 h, coating intact |
||
|
Note: The above data were obtained under laboratory conditions according to national standards. Actual performance may vary under different environmental conditions, and no warranty is made regarding permissible deviations. |
|||
